ClareControls CH-THSTAT-W Guía de instalación

Busca en linea o descarga Guía de instalación para Termostatos ClareControls CH-THSTAT-W. ClareControls CH-THSTAT-W Installation guide Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 19
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
DCN: 2012-11-225-1 Page 1 of 19
Installation Guide
Model CH-THSTAT-Z
Z-Wave Thermostat
This thermostat is compatible with most HVAC systems, including the following:
24VAC systems NOTE: requires both the 24R and 24C (common) wires
Standard gas/oil/electric heating systems
o 1 stage heating and cooling
o 2 stage heating and cooling
Heat Pump systems:
o 1 stage heating and cooling
o 2 stage heating and cooling
o 2
nd
or 3
rd
stage Auxiliary heating (heat strips)
Do NOT use for line voltage controls (120/240VAC)
Stop! Before removing your existing thermostat, be sure to label
the wires with the terminal markings on the old thermostat and record
them below.
Standard HVAC System Wiring
Terminal
Marking
Meaning
Typical Wire Color
Record the old thermostat wire
connections and terminal
marking here
C
24VAC Common
Blue
R
24VAC Return
Red
G
Fan
Green
W or W1
Heat stage 1
White
Y or Y1
Cool stage 1
Yellow
W2
Heat stage 2
Orange
Y2
Cool stage 2
Black
Heat Pump HVAC System Wiring
Terminal
Marking
Meaning
Typical Wire Color
Record the old thermostat wire
connections and terminal
marking here
C
24VAC Common
Blue
R
24VAC Return
Red
G
Fan
Green
W or W1
Aux Heat
White
Y or Y1
Compressor stage 1
Yellow
O (or B*)
Change Over Valve
Orange (brown*)
Y2
Compressor stage 2
Black
* If you have a terminal marked “B” with a brown wire attached to it, that means you have a
changeover (C/O) with heating type heat pump system. Be sure to set the change over
type in the Installer Settings menu to C/O Type: w/Heat. Otherwise leave it set to
w/Cool.
Vista de pagina 0
1 2 3 4 5 6 ... 18 19

Indice de contenidos

Pagina 1 - Z-Wave Thermostat

DCN: 2012-11-225-1 Page 1 of 19 ™ Installation Guide Model CH-THSTAT-Z Z-Wave Thermostat This thermostat is compatible with most HVAC systems, in

Pagina 2

DCN: 2012-11-225-1 Page 10 of 19 Setting the heating or cooling temperature setpoint ! If the System Mode is

Pagina 3

DCN: 2012-11-225-1 Page 11 of 19 Setting the System Mode: Off, Heat, Cool, Auto System Modes • OFF: System is of

Pagina 4

DCN: 2012-11-225-1 Page 12 of 19 Setting Fan Mode and System Status Indicators Optional Fan Mode Fan Cycler. If the Fan Cycler fe

Pagina 5

DCN: 2012-11-225-1 Page 13 of 19 Menu Selection Main Menu Items • Energy Usage > Enabled for In-Home Display versi

Pagina 6 - Installer Settings Summary

DCN: 2012-11-225-1 Page 14 of 19 Select Schedule Select Heat and Cool Preset: Comfort Preset: Energy Miser Done User Settings Select Set Clock F

Pagina 7

DCN: 2012-11-225-1 Page 15 of 19 Set Clock: The Set Clock screen allows you to set the Thermostat’s internal clock. To set the Time and Date, move

Pagina 8 - Heat Pump HVAC System Wiring

DCN: 2012-11-225-1 Page 16 of 19 Backlite/Display: Go to the Backlite/Display settings screen. This menu allows you to set the backlight timeout p

Pagina 9 - Operation Guide

DCN: 2012-11-225-1 Page 17 of 19 Thermostat Info Screen Setup Button To setup the thermostat to work with your HVAC system, press and hold th

Pagina 10 - Setpoint change screen

DCN: 2012-11-225-1 Page 18 of 19 Z-Wave® Installation Z-Wave controllers from various manufacturers may support the Z-Wave Thermostat General V2 De

Pagina 11 - SYSTEM MODE

DCN: 2012-11-225-1 Page 19 of 19 FCC/IC INFORMATION TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the follo

Pagina 12 - System Status Indicators

DCN: 2012-11-225-1 Page 2 of 19 INSTALLATION HVAC System Setup The thermostat requires that you setup the type and configuration of your HVAC syst

Pagina 13 - Menu Selection

DCN: 2012-11-225-1 Page 3 of 19 connected to an “O” terminal, then you have a “changeover with cool” system. If you have a brown wire connected to

Pagina 14

DCN: 2012-11-225-1 Page 4 of 19 Sets the minimum separation between heating and cooling setpoints. Attempts to lower the cooling below the heating

Pagina 15 - Set Clock

DCN: 2012-11-225-1 Page 5 of 19 Fan Cycler The fan cycler function cycles the HVAC system fan for an ON period followed by an Off period continuousl

Pagina 16 - Away Setpoints

DCN: 2012-11-225-1 Page 6 of 19 Installer Settings Summary Setting Range Default Display Lock Y or N N Locks out front buttons Service Mode Submen

Pagina 17 - Thermostat Info

DCN: 2012-11-225-1 Page 7 of 19 Standard HVAC System G Fan W1 Heat Stage 1 Y1 Compressor Stage 1 R 24VAC Return C 24VAC Common Thermostat Co

Pagina 18 - Z-Wave® Installation

DCN: 2012-11-225-1 Page 8 of 19 Heat Pump HVAC System Thermostat Connection G Fan W1 Aux Heat Y1 Compressor Stage 1 R 24VAC Return C 24VAC

Pagina 19

DCN: 2012-11-225-1 Page 9 of 19 ™ Operation Guide Model CH-THSTAT-Z Z-Wave Thermostat MENU COOL MO

Comentarios a estos manuales

Sin comentarios