ClareControls CH-THSTAT-W Guía de usuario descargar pdf (Pagina 16)

10 amp.1640 User Guide

Specifications

Voltage 120-240 VAC, 2 A 50/60 Hz

Current

Standby

Alarm

0.06 A (1.3 A with music, max.)

2.6A (with Sine wave, worst case)

Inputs 16 Gold RCA jacks with adjustable gain

(+4 dBu pro to -10 dBV consumer)

Input impedance Single ended 10 k Ω

Output power 16 x 80 W into 4 Ω, or 40 W into 8 Ω

Peak output power

(Bridge mode, single output)

160 W at 8 Ω bridged

Frequency response

10 Hz – 20 kHz

(4 Ω, 8 Ω, Open load)

± 0.4dB

Idle noise < 140 dBr(A)

THD+N distortion

(4 Ω SE, f = 100 Hz, Po=1w)

0.003%

IMD Intermodulation (CCIF)

(f=18.5 kHz, 1 kHz Po 10W)

0.0009%

Trigger control 12 VDC on 3.5 mm mono jack

Fan noise Variable speed, 28 db(A) worst case

Standby power <0.5 W

Weight 8.6 lbs. (3.9 kg)

Dimensions (W × H × D) 17.00 × 1.75 × 12.25 in. (43.2 × 4.5 × 29.2 cm)

Operating environment

Temperature

Relative humidity

32 to 104°F (0 to 40°C)

0 to 95% noncondensing

Note: All specifications are subject to change without notice.

1 2 ... 11 12 13 14 15 16 17

Sin comentarios

ClareControls CH-THSTAT-W Guía de usuario Pagina 16